Apple ipod

Jailbreaking your iPhone 3G running OS 3.0 or 3.0.1

Jailbreaking your Apple iPhone 2G, 3G, 3G or iPod Touch is a complex process made many not, with a range of consequences negative would be enough to scare me, I was not so techno-curious. The only process began when he discovered that some of the features of the iPhone had written the code in the kernel to enable certain features work, but Apple has decided to ensure that these functions have gone unnoticed. Many users iPhone and iPod Touch, of course, were upset and began looking for a way to turn these features. After all, they are there, then why not allowed to be used? Well Well, find a way to this and has not been easy.

As it happens, a small group of software engineers warned (Not affiliated with Apple), known as iPhone-Dev Team , came together and find the appropriate feats in baseband of the iPhone code to turn off the "that" Apple had put controls in place to be completely ignored. Well, since this time, Apple and iPhone-dev team have been constantly in a race up the other. Whenever Apple releases a new firmware update, which usually set the concrete achievements have been found by the team and the strength jailbroken iPhone back in "Hear Me" state within your code. Usually, right after doing so, the team iPhone-dev is more exploits in the code again and again that creates beautiful jailbreak fever. And so the dance.

Now is not free jailbreaking consequences. This technique will void the warranty from Apple and overlook the many other problems that might arise in the not-so-understanding around the process, namely that many describe as a "brick" the camera (any error that locked in a state that can not be reversed). However, if done right, the freedoms that provides rich restrictions on Apple devices may be considered worth the effort. Thus, while the process jailbreaking may seem somewhat difficult, even frightening in fact, here is an explanation using the iPhone 3G as a model.

Note Important: Any person who has already upgraded to the new OS 3.1 released in September 2009 is out of luck. Apple has gone back to fix some problems new firmware, and therefore cutting capacity after jailbreak 3.1 was installed. I'll explain below.

Step 1

The first step in the whole process is to find the files and software necessary to start. Thanks to the efforts of the iPhone-Dev team, tools that the result is the only jailbroken responsible for the joy and the experience of today.

The software needed for jailbreaking IPhone 3G (specifically) is the tool called "redsn0w" (is a zero for the record.) The latest redsn0w for iPhone 3G is a version 0.8. Can be found on its website at software section.

The file needed for jailbreaking your iPhone 3G is what is known. "Ipsw" for OS 3.0. The process asks what Operating Systems (SO) to return to flight process version, the device must be "restored" to a given time (the process), and is crucial to ensure that you have saved on your PC or Mac to scan your computer and iTunes 3.0 ipsw suitable point to prevent the computer restarts automatically to the new OS 3.1. IPSW file for OS 3.0 can be found on our server here:

Step 2: Connect

Once redsn0w have OS 0.8 and 3.0 IPSW downloaded file, extracts and saves on your computer you're ready to rock and roll.

Start by opening iTunes, connect your iPhone 3G to your computer. (Note: Do not accept the request to download and install the new firmware Once iTunes starts OS 3.1.)

Now you want to make a backup to be sure. Simply click photo right in iTunes and select "save" X … "And let iTunes back up your device. In any case, do not go, you have your copy security back without losing data on your iPhone.

redsn0w Step 3: Start

Go where you saved redsn0w, and start the program (in the folder, double- click the executable file that ends in. exe). Once it starts, will close automatically and ask you to iTunes where is the IPSW file (the firmware operating system that you downloaded in step 1). Click on Browse and navigate to where you saved Ipsw for OS 3.0. After finding it, then click Next.

Step 4 redsn0w parameters: and the process

A Once you click Next, after finding the IPSW file, the program actually get to work. A window opens with two cases can be verified. They say "Install Cydia" and the other says "install the ice." Cydia ONLY check, no ice.

After clicking on the box to install Cydia, the program will display a new window and begin to educate on how to get your device in recovery mode. Follow on-screen instructions as they are written. The first step is to convert even if your iPhone 3G is plugged in. Once it is off, click Next. Here is where the recovery model "of instructions come in.

Get the device in recovery mode can be difficult. If this does not work properly, you must start the steps above to return to this point and try again. For the device in recovery mode, while already at this stage and is still connected to the computer, the power button (the button at the top of the unit) for 5 seconds, then press and hold Start button (bottom button on the front of the camera) and hold the power button for 10 seconds. After the screen goes to a screen black, you release the power button while holding down the home continuously for a bit longer (up to 30 seconds more people).

During this last period of waiting while holding the start button, a screen appears blank. A few seconds later the screen appears blank, you can release the start button. A new screen appears on your 3G iPhone with an image of a hard disk and a green arrow pointing down at him, and then read the title: "Data download jailbreak Apple …». The little swirly begin his magic in the legend.

Just after the swirly arrival appears A new screen with an image of a pineapple with his legs as if looking for its operation on a beach, and a caption below read: "intermittent" NOR. If you arrived at this moment, is almost free home. More stories are in the same picture as the progress bar indicates the continuation of the process. Once completed by complete, will automatically restart your iPhone 3G.

Step 5: Make it worked

Once the device has restarted (assuming that is, as it should), go to the last page, where an opening for an application would have been. This is where "the request that the logo Cydia. If the application is Cydia on your device, then congratulations, you've just jailbroken iPhone 3G.

Step 6 (optional): Unlock your 3G iPhone after jailbreaking

If jailbreaking is not enough, and want the freedom to choose the company added that will unlock the iPhone 3G. It is much simpler than for jailbreaking only a couple of steps you can do, but they must be executed after jailbreaking the device, the program installed via Cydia jailbreaking is what unlocks the device.

Just click on the application Cydia and wait for it to open. Once done, will say that is being reorganized and closed when finished. You may be asked to approve some updates that you allow. After its closure, again in Cydia, then click Search and type of mobilesubstrate. Make sure you use the latest version. Otherwise, click install and validate.

A new screen will appear with three options after that. These are the packages & "," Fonts "and" storage. "Click the sources told to do Click the middle "and", then once you open the page source, click Edit in the upper right corner of the screen, click Add Up to the left. Type "repo666.ultrasn0w.com" (Note: "0" ultrasn0w is the number zero).

Finally, select the new source added in the file menu of temporary source and select "ultrasn0w. Then click Install, click confirm. Once the program completed the "switch, click Cydia and then press the start button iPhone. Now you just turn off the iPhone 3G, then turn their backs on the iPhone 3G and you should be officially released.

Congratulations again. He is now free of barriers and restrictions Apple ambitious hands.

Dan McNaught is a freelance writer specializing in technology that loves sports movies and DVR. He spends most of his free time driving his wife crazy with investigation and testing new gadgets.

About the Author

You deserve to get the most out of your services, whether it’s high-speed Internet, phone, cable, or HDTV. Digital Landing is here to help, making it easy to find out everything you need to know about digital services for your home.

First Look At Sn0wbreeze v1.4: Jailbreak iPhone Firmware 3.1.3 With Custom .ipsw