Apple ipod

IPhone Screen Replacement – A Step by Step

One of the more complex repairs on an iPhone is a screen repair and replacement, before attempting this repair, make sure you have enough time to complete the task, and have a clear workspace for the iPhone replacing the screen to sit while work in them.

To repair a replacement of the screen, it is necessary to completely disassemble the iPhone, so I would say that, prior to repair to get some small pieces of paper to mark their parts, and originally included the screw. Label as follows: metal screw back, aluminum base, and Motherboard – put in the work area in this order with little space between them for the building replacement iPhone screen and lying in.

Tools and equipment needed for this repair is a case opener, a small Phillips screwdriver, a clip to open the SIM tray and replace the iPhone screen, once you have on hand these paper labels and glue. Make sure your hands are clean before starting the repair.

First remove the SIM card tray – this inserting a clip into the hole on the top of the iPhone next to the button when the clip is inserted, the tray should remove the SIM card. Then use the opener to remove the plastic housing back to the iPhone. Put these two components together with paper labels, after mounting the iPhone screen replacement will to reverse the order of these instructions to return the iPhone. For this reason, I suggest you put off by the label sheet.

The next step is to remove the two small screws on each side of the metal box is set back, and a screw top, the middle of the place where you removed the plastic back – put on labels paper. When finished, take the case again and opened carefully along both sides of the iPhone to loosen the back away from the picture – you will find the back metal is secured by a ribbon cable, carefully separate the main part of the iPhone does not, the back metal.

The next step in the replacement CAUTION needs screen repair – You must remove the antenna cable iPhone, secured by the adhesive in three positions, lifting Carefully glue lose points. After that, you have to remove 10 screws from the sides of the iPhone world, and place them in the role of labels outside of the box – after removing the three screws holding the motherboard. You must remove the motherboard and the battery, and that are welded in general, having done that, you can carefully remove the iPhone is being part.

The next step is to remove the suit LCD screen replacement – is probably the most difficult to repair and to do carefully. Loosen the three clips on the sides of the screen and begin to phase out the screen, you will see some of the child are intertwined in iPhone – guide carefully through the frame and slide through.

When you finish the iPhone screen replacement and insert it into the phone, carefully trace your steps to ensure that no mistakes are made during installation of the iPhone to its original condition.

This Guide iPhone screen replacement has been provided by href = "http://www.iphonepartspro.com/"> iPhone Pro parts – Online store for all your iPhone accessories, spare parts and accessories for connecting your iPhone at home.

About the Author

Mark Grey,
mark@markfreelance.com

How to replace iPhone 3G LCD for under $50